Skip to main content
Supported TKStar devices using the H02-family protocol connect to the TKStar listener in Jitra. Many models use SMS commands with the common factory password 123456.

​
Official Command Reference

TKStar official configuration command table

Server, APN, upload interval, and time-zone commands from the official TKStar TK208 manual.

​
Configure by SMS

Replace <APN> with the SIM operator APN. These commands apply to TK208-style firmware:
If the APN requires credentials, use the APN username and password commands documented for the model. Wait for a success reply after every command.

​
Read Back the Configuration

Use param1 or check123456 when supported by the model to inspect the saved APN, server, port, and reporting values. Restart only after they match the Jitra profile.
TKStar command sets vary substantially between products. Use the exact model manual and do not assume a command is supported because another TKStar model accepts it.

​
Verify in Jitra

Create the Object in Settings > Objects > New, choose the matching TKStar model, and enter the identifier reported by the device. Confirm a recent update and correct time on Tracking.

​
Official References